技术标签： rpm&power power rpm
FROM：https://blog.csdn.net/hongzg1982/article/details/56516147
Software Component Block Diagram
RPM（Resource Power Manager）是高通MSM平台另外加的一块芯片，虽然与AP芯片打包在一起，但其是一个独立的ARM Core。之所以加这个东西，就是要控制整个电源相关的shared resources，比如ldo，clock。负责与SMP,MPM交互进入睡眠或者唤醒整个系统。
以下是高通文档中对各个功能模块的说明。
Kernel – DALSys-based lightweight kernel
RPM handler – RPM handler abstracts the RPM message protocol away
from other software
Drivers – Drivers for each of the resources supported by the RPM will
register with RPM handler to request notification when requests are
received for the resource which the driver controls
NPA – A driver may use the Node Power Architecture (NPA) to represent
resources controlled by the driver
Clock driver – RPM clock driver directly handles aggregating requests
from each of the masters for any of the systemwide clock resources
controlled by the RPM
Bus arbitration driver – RPM bus arbiter driver takes bus arbiter settings
as requests from the different masters in the system and aggregates them
to represent the frequency-independent system settings
PMIC – RPM PMIC driver directly aggregates requests from each of the
masters for any of the systemwide PMIC resources controlled by the RPM
Watch Dog driver – Watch Dog driver is a fail-safe for incorrect or stuck
code
MPM driver – Used to program the MPM hardware block during
systemwide sleep
RPM message driver – RPM message protocol driver abstracts the RPM
message protocol away from other subsystem software
Messaging Masters
与RPM通过shared memory region交互进行dynamic and static resource/power management的可以有很多种。
这个可以查看smd_type.h中的smd_channel_type。但目前看只有AP,MODEM,RIVA,TZ与RPM有交互，这个可以看message_ram_malloc()函数中的设置。
其实也可以间接从rpm_config.c文件中的SystempData temp_config_data这个变量中看出来到底有几个部分是与RPM进行交互的。
RPM Initialization
在main.c文件中会逐个调用init_fcns[]变量中的函数进行初始化。当然也包括上面的资源的初始化。
const init_fcn init_fcns[] =
{
populate_image_header,
npa_init,
#if (!defined(MSM8909_STUBS) )
railway_init_v2,
#endif
PlatformInfo_Init, /* pm_init is using PlatformInfo APIs */
pm_init,//LDO等资源的注册
acc_init,
#if (!defined(MSM8909_STUBS) )
railway_init_early_proxy_votes,
#endif
// xpu_init, /* cookie set here also indicates to SBL that railway is ready */
(init_fcn)Clock_Init, //Clock资源的注册
__init_stack_chk_guard,
ddr_init,
smem_init,
init_smdl,
version_init, /* Needs to be after smem_init */
rpmserver_init,
rpm_server_init_done,
railway_init_proxies_and_pins,
#if (!defined(MSM8909_STUBS) )
rbcpr_init,
#endif
svs_init,
vmpm_init,
sleep_init,
#if (!defined(MSM8909_STUBS) )
QDSSInit,
#endif
exceptions_enable,
swevent_qdss_init,
icb_init,
#if (!defined(MSM8909_STUBS) )
debug_init,
system_db_init,
zqcal_task_init,
#endif
rpm_settling_timer_init,
gpio_toggle_init,
rpm_set_changer_common_init,
}
pm_init ： LDO等资源的注册，然后接收rpm_message。接收rpm_message的部分高通代码没有给，所以看不到，但从rpm log来看，是有接收处理并反馈的过程的。
107.764902: rpm_message_received (master: "APSS") (message id: 723)
107.764908: rpm_svs (mode: RPM_SVS_FAST) (reason: imminent processing)
107.764924: rpm_svs (mode: RPM_SVS_FAST) (reason: imminent processing)
107.764939: rpm_process_request (master: "APSS") (resource type: ldoa) (id: 14)
107.764942: rpm_xlate_request (resource type: ldoa) (resource id: 14)
107.764946: rpm_apply_request (resource type: ldoa) (resource id: 14)
107.765033: rpm_send_message_response (master: "APSS")
ldoa对应的resource type为RPM_LDO_A_REQ。这个在pm_rom_device_init()里的pm_rpm_ldo_register_resources(RPM_LDO_A_REQ, num_of_ldoa); 这里被注册，所以看进去最后xlate和apply最终都会被pm_rpm_ldo_translation()和pm_rpm_ldo_apply进行处理。pm_rpm_ldo_tranlation()读取kvp内容，pm_rpm_ldo_apply最终把request的内容设置上去。
kernel端在msm-pm8916-rpm-regulator.dtsi文件中定如下ldo内容
1
2
2. (init_fcn)Clock_Init：Clock资源的注册，这个过程和上面的也差不多
3. rpmserver_init：启动接收message的进程
比如要设置LDO3的电压和电流，kvp的内容如下：
{
“req\0” : {
{“rsrc” : “ldo\0”}
{“id” : 3}
{“set” : 0}
{“data” : {
{“uv\0\0” : 1100000}
{“mA\0\0” : 130}
}
}
}
}
RPM log里边显示是APSS，这个在kernel里边也是有设置的，在msm-pm8916-rpm-regulator.dtsi里的
rpm-regulator-ldoa14 {
compatible = "qcom,rpm-smd-regulator-resource";
qcom,resource-name = "ldoa";
qcom,resource-id = <14>;
qcom,regulator-type = <0>;
qcom,hpm-min-load = <5000>;
status = "disabled";
regulator-l14 {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "8916_l14";
qcom,set = <3>;
status = "disabled";
};
};
MSM的retulator相关的驱动会读取这个，如果有需要发请求的话，会根据这个dtsi的内容，组织kvp，然后通过rpm_request通道发过去。
rpm_request通道在rpm里边打开的地方是在rpm_handler.cpp里边的Hander::init()函数
void Handler::init()
{
smdlPort_ = smdl_open("rpm_requests",
rpm->ees[ee_].edge,
SMDL_OPEN_FLAGS_MODE_PACKET,
rpm->ees[ee_].smd_fifo_sz,
(smdl_callback_t)rpm_smd_handler,
this);
}
在对应的kernel端也有打开，可以参考msm8916.dtsi文件里边的设置。
rpm_bus: qcom,rpm-smd {
compatible = "qcom,rpm-smd";
rpm-channel-name = "rpm_requests";
rpm-channel-type = <15>; /* SMD_APPS_RPM */
};
以下是注册资源的函数和资源的类型：
所有的资源都通过rpm_register_resource()函数注册。这些资源包括clock, ldo等。具体可以看下面的类型定义。
typedef enum
{
RPM_TEST_REQ = 0x74736574, // 'test' in little endiant
RPM_CLOCK_0_REQ = 0x306b6c63, // 'clk0' in little endian; misc clocks [CXO, QDSS, dcvs.ena]
RPM_CLOCK_1_REQ = 0x316b6c63, // 'clk1' in little endian; bus clocks [pcnoc, snoc, sysmmnoc]
RPM_CLOCK_2_REQ = 0x326b6c63, // 'clk2' in little endian; memory clocks [bimc]
RPM_CLOCK_QPIC_REQ = 0x63697071, // 'qpic' in little endian; clock [qpic]
RPM_BUS_SLAVE_REQ = 0x766c7362, // 'bslv' in little endian
RPM_BUS_MASTER_REQ = 0x73616d62, // 'bmas' in little endian
RPM_BUS_SPDM_CLK_REQ = 0x63707362, // 'bspc' in little endian
RPM_BUS_MASTER_LATENCY_REQ = 0x74616c62, // 'blat' in little endian
RPM_SMPS_A_REQ = 0x61706D73, // 'smpa' in little endian
RPM_LDO_A_REQ = 0x616F646C, // 'ldoa' in little endian
RPM_NCP_A_REQ = 0x6170636E, // 'ncpa' in little endian
RPM_VS_A_REQ = 0x617376, // 'vsa' in little endian
RPM_CLK_BUFFER_A_REQ = 0x616B6C63, // 'clka' in little endian
RPM_BOOST_A_REQ = 0x61747362, // 'bsta' in little endian
RPM_SMPS_B_REQ = 0x62706D73, // 'smpb' in little endian
RPM_LDO_B_REQ = 0x626F646C, // 'ldob' in little endian
RPM_NCP_B_REQ = 0x6270636E, // 'ncpb' in little endian
RPM_VS_B_REQ = 0x627376, // 'vsb' in little endian
RPM_CLK_BUFFER_B_REQ = 0x626B6C63, // 'clk' in little endian
RPM_BOOST_B_REQ = 0x62747362, // 'bstb' in little endian
RPM_SWEVENT_REQ = 0x76657773, // 'swev' in little endian
RPM_OCMEM_POWER_REQ = 0x706d636f, // 憃cmp?in little endian
RPM_RBCPR_REQ = 0x727063, // 'cpr'in little endian
RPM_GPIO_TOGGLE_REQ = 0x6F697067, // 'gpio' in little endian:[gpio0,gpio1,gpio2]
} rpm_resource_type;
RPM Resouce Registration
rpm_register_resource()：
Gpio_toggle.c (x:\j3_ctc\nhlos\rpm_proc\core\power\rpm\common): rpm_register_resource(RPM_GPIO_TOGGLE_REQ, 3, sizeof(gpio_toggle_inrep), gpio_toggle_xlate, gpio_toggle_apply, 0);
Icb_rpm_spdm_req.c (x:\j3_ctc\nhlos\rpm_proc\core\buses\icb\src\common): rpm_register_resource( RPM_BUS_SPDM_CLK_REQ,
Ocmem_resource.c (x:\j3_ctc\nhlos\rpm_proc\core\power\ocmem\src): rpm_register_resource(RPM_OCMEM_POWER_REQ, 3, sizeof(rpm_ocmem_vote_int_rep), rpm_ocmem_xlate, rpm_ocmem_apply, 0);
Pm_rpm_boost_trans_apply.c (x:\j3_ctc\nhlos\rpm_proc\core\systemdrivers\pmic\npa\src\rpm): rpm_register_resource(resourceType, num_npa_resources + 1 , sizeof(pm_npa_boost_int_rep), pm_rpm_boost_translation, pm_rpm_boost_apply, (void *)boost_data);
Pm_rpm_clk_buffer_trans_apply.c (x:\j3_ctc\nhlos\rpm_proc\core\systemdrivers\pmic\npa\src\rpm): rpm_register_resource(resourceType, num_npa_resources + 1,
Pm_rpm_ldo_trans_apply.c (x:\j3_ctc\nhlos\rpm_proc\core\systemdrivers\pmic\npa\src\rpm): rpm_register_resource(resourceType, num_npa_resources + 1, sizeof(pm_npa_ldo_int_rep), pm_rpm_ldo_translation, pm_rpm_ldo_apply, (void *)ldo_data);
Pm_rpm_smps_trans_apply.c (x:\j3_ctc\nhlos\rpm_proc\core\systemdrivers\pmic\npa\src\rpm): rpm_register_resource(resourceType, num_npa_resources + 1, sizeof(pm_npa_smps_int_rep), pm_rpm_smps_translation, pm_rpm_smps_apply, (void *)smps_data);
Pm_rpm_vs_trans_apply.c (x:\j3_ctc\nhlos\rpm_proc\core\systemdrivers\pmic\npa\src\rpm): rpm_register_resource(resourceType, num_npa_resources + 1, sizeof(pm_npa_vs_int_rep), pm_rpm_vs_translation, pm_rpm_vs_apply, (void *)vs_data);
Rpmserver.cpp (x:\j3_ctc\nhlos\rpm_proc\core\power\rpm\server):void rpm_register_resource
Rpmserver.h (x:\j3_ctc\nhlos\rpm_proc\core\api\power):void rpm_register_resource
Rpm_npa.cpp (x:\j3_ctc\nhlos\rpm_proc\core\power\rpm\server): rpm_register_resource(resource, num_npa_resources, sizeof(npa_request_data_t), rpm_npa_xlate, rpm_npa_apply, adapter);
Rpm_npa.cpp (x:\j3_ctc\nhlos\rpm_proc\core\power\rpm\server): rpm_register_resource(resource, num_npa_resources, sizeof(npa_request_data_t), rpm_npa_xlate, rpm_npa_apply, adapter);
Rpm_test_resource.cpp (x:\j3_ctc\nhlos\rpm_proc\core\power\rpm\server): rpm_register_resource(RPM_TEST_REQ, 1, 4, rpm_test_xlate, rpm_test_apply, 0);
Swevent.c (x:\j3_ctc\nhlos\rpm_proc\core\power\rpm\common): rpm_register_resource(RPM_SWEVENT_REQ, 1, sizeof(swevent_inrep), rpm_swevent_xlate, rpm_trace_control, 0);
所有的资源都是通过rpm_register_resource函数注册。可以看到像RPM_BUS_SPDM_CLK_REQ，RPM_GPIO_TOGGLE_REQ都是通过这个接口直接注册的。
NPA相关也是通过rpm_register_resource注册，但是用了NPA的driver去实际注册资源和使用资源。
NPA相关的两个注册接口是：rpm_create_npa_adapter()，rpm_create_npa_settling_adapter()。
可以看到这两个就注册了三个CLOCK相关的资源，
---- rpm_create_npa_adapter Matches (8 in 5 files) ----
ClockRPM.c : clk0_adapter = rpm_create_npa_adapter(RPM_CLOCK_0_REQ, 3); // Misc clocks: [CXO, QDSS, dcvs.ena]
ClockRPM.c : clk1_adapter = rpm_create_npa_adapter(RPM_CLOCK_1_REQ, 2); // Bus clocks: [pcnoc, snoc]
Rpmserver.h :rpm_npa_adapter rpm_create_npa_adapter(rpm_resource_type resource, unsigned num_npa_resources);
Rpm_npa.cpp :rpm_npa_adapter rpm_create_npa_adapter(rpm_resource_type resource, unsigned num_npa_resources)
---- rpm_create_npa_settling_adapter Matches (5 in 5 files) ----
ClockRPM.c : clk2_adapter = rpm_create_npa_settling_adapter(RPM_CLOCK_2_REQ, 1); // Memory clocks: [bimc ]
Rpmserver.h :rpm_npa_adapter rpm_create_npa_settling_adapter(rpm_resource_type resource, unsigned num_npa_resources);
Rpm_npa.cpp :rpm_npa_adapter rpm_create_npa_settling_adapter(rpm_resource_type resource, unsigned num_npa_resources)
NPA client的创建函数是:npa_create_sync_client()
NPA clien request的函数是:npa_issue_required_request()
NPA client创建并request这个资源，必须要适用像下面这样的npa node。这个可以直接像下面这样定义。然后再使用。步骤如下：
1.定义npa node definition
static npa_resource_definition sleep_uber_resource[] =
{
{
"/sleep/uber", /* Name */
"on/off", /* Units */
0x7, /* Max State */
&npa_or_plugin, /* Plugin */
NPA_RESOURCE_DEFAULT, /* Attributes */
NULL, /* User Data */
}
};
npa_node_definition sleep_uber_node =
{
"/node/sleep/uber", /* name */
sleep_uber_driver, /* driver_fcn */
NPA_NODE_DEFAULT, /* attributes */
NULL, /* data */
0, NULL, /* dependency count, dependency list */
NPA_ARRAY(sleep_uber_resource)
};
2.npa_define_node(&sleep_uber_node, initial_state, NULL)，调用这个函数初始化这个NPA node
3.创建Client
uber_node_handle = npa_create_sync_client("/sleep/uber",
"sleep",
NPA_CLIENT_REQUIRED);
4.npa_issue_required_request(uber_node_handle, request) ： request
RPM Resource handle
当子系统通过share memory发送请求给RPM。RPM负责处理这些请求并设置。RPM处理请求的流程如下：
SMD IRQ ->smd_isr()->rpm_smd_handler() [在Handler::init函数中注册的，rpm_request channel的SMD处理函数]->Handler::queue()->schedule_me()->Handler::execute_until()->Handler::processMessage()->resource_ee_request()->发到每个资源注册xlate然后再调用apply等
下面以高通控制DDR频率(BIMC)的过程为例，看一下kernel这边怎么发送请求给RPM的。
device tree设置如下：
cpubw: qcom,cpubw@0 {
reg = <0 4>;
compatible = "qcom,devbw";
governor = "cpufreq";
qcom,src-dst-ports = <1 512>;
qcom,active-only;
qcom,bw-tbl = //这个频率表对应RPM中BIMC频率表，不过删掉了50MHz和9.6MHz。
/* 73 9.60 MHz */
/* 381 50MHz */
< 762 /* 100 MHz */>,
< 1525 /* 200 MHz */>,
< 3051 /* 400 MHz */>,
< 4066 /* 533 MHz */>;
};
对应的kernel代码在devfeq_devbw.c文件。根据算法算出当前应该设定的ddr总线频率之后，最后通过以下顺序发消息给RPM。这里暂时不讨论按什么规则选择需要的频率的，只看按什么路径发频率给RPM的。
set_bw()->msm_bus_scale_client_update_request()->update_request_adhoc()[msm_bus_arb_adhoc.c]->update_path()->msm_bus_commit_data()->flush_bw_data()->send_rpm_msg()->msm_rpm_send_message()
System Sleep Overview
RPM除了对Clock和LDO等资源的管理之外，还管理整个系统睡眠。
可以看到睡眠并不是通过shared memory发送消息给RPM的，而是子系统通过设置对应的SPM，SPM触发RPM相应的中断来完成的。
kernel这边设置spm的模式的设置如下：
enum {
MSM_SPM_MODE_DISABLED,
MSM_SPM_MODE_CLOCK_GATING,
MSM_SPM_MODE_RETENTION,
MSM_SPM_MODE_GDHS,
MSM_SPM_MODE_POWER_COLLAPSE,//设置成这个状态之后，对应的SPM应该就会触发RPM的对应的shutdown中断
MSM_SPM_MODE_NR
};
rpm中，与哪几个子系统传递接收message，然后和哪几个子系统的SPM进行交互，交互的中断号是多少的设置如下：
static SystemData temp_config_data =
{
.num_ees = 4, // 4 EE's, [apps, modem, pronto, tz]
.ees = (EEData[] ) {
[0] = {
.edge = SMD_APPS_RPM,
.smd_fifo_sz = 1024,
.ee_buflen = 256,
.priority = 4,
.wakeupInt = (1 << 5) | (1 << 7),
.spm = {
.numCores = 1,
.bringupInts = (unsigned[]) { 15 },
.bringupAcks = (unsigned[]) { 20 },
.shutdownInts = (unsigned[]) { 14 },//这个应该是SPM睡眠的中断号
.shutdownAcks = (unsigned[]) { 4 },
},
},
[1] = {
.edge = SMD_MODEM_RPM,
.smd_fifo_sz = 1024,
.ee_buflen = 1024,
.priority = 2,
.wakeupInt = (1 << 13) | (1 << 15),
.spm = {
.numCores = 1,
.bringupInts = (unsigned[]) { 25 },
.bringupAcks = (unsigned[]) { 22 },
.shutdownInts = (unsigned[]) { 24 },
.shutdownAcks = (unsigned[]) { 6 },
},
},
[2] = {
.edge = SMD_RIVA_RPM,
.smd_fifo_sz = 1024,
.ee_buflen = 256,
.priority = 1,
.wakeupInt = (1 << 17) | (1 << 19),
.spm = {
.numCores = 1,
.bringupInts = (unsigned[]) { 31 },
.bringupAcks = (unsigned[]) { 23 },
.shutdownInts = (unsigned[]) { 30 },
.shutdownAcks = (unsigned[]) { 7 },
},
},
[3] = {
.edge = SMD_RPM_TZ,
.smd_fifo_sz = 1024,
.ee_buflen = 256,
.priority = 5,
.wakeupInt = 0,
.spm = {
.numCores = 0,
.bringupInts = (unsigned[]) { 31 },
.bringupAcks = (unsigned[]) { 23 },
.shutdownInts = (unsigned[]) { 30 },
.shutdownAcks = (unsigned[]) { 7 },
},
},
},
.supported_classes = SUPPORTED_CLASSES,
.supported_resources = SUPPORTED_RESOURCES,
.classes = (ResourceClassData[SUPPORTED_CLASSES]) { 0 },
.resources = (ResourceData[SUPPORTED_RESOURCES]) { 0 },
.resource_seeds = (int16_t[SUPPORTED_RESOURCES]) { 0 },
}
但还不知道这些中断号到底怎么来的，，中断的个数都是1个，，这个怎么来的也还是不知~
这些内容在rpm_spm_init中会读取，然后设置中断。shutdownISR对应的中断处理函数为rpm_spm_shutdown_high_isr。
这个中断函数会调用rpm_spm_state_machine()处理RPM状态机，进入或者阻止进入睡眠模式等。
void rpm_spm_state_machine(unsigned ee, rpm_spm_entry_reason reason)
{
INTLOCK();
bool changed_state = false;
EEData *ee_state = &(rpm->ees[ee]);
SetChanger *changer = ee_state->changer;
do
{
switch(ee_state->subsystem_status)
{
case SPM_AWAKE:
changed_state = FALSE;
if(0 == ee_state->num_active_cores)
{//等待所有的core都进入睡眠！！之后才能走到GOITONG TO SLEEP状态！！
SPM_CHANGE_STATE(SPM_GOING_TO_SLEEP);
}
else
{
// We're awake, so make sure we keep up with any incoming bringup reqs.
rpm_acknowledge_spm_handshakes(ee);
}
break;
case SPM_GOING_TO_SLEEP:
if(changed_state)
{
// check for scheduled wakeup
uint64_t deadline = 0;
if(! rpm_get_wakeup_deadline(ee, deadline))
{
deadline = 0;
}
changer->setWakeTime (deadline);
// enqueue immediate set transition to sleep
changer->enqueue(RPM_SLEEP_SET, 0);
}
changed_state = FALSE;
// When we've finished selecting the sleep set, we're officially asleep.
if((SPM_TRANSITION_COMPLETE == reason) && (RPM_SLEEP_SET == changer->currentSet()))
{
SPM_CHANGE_STATE(SPM_SLEEPING);
}
// However, we might get a wakeup request before we've made it all the way to sleep.
if(SPM_BRINGUP_REQ == reason)
{
// Set the preempt flag; this will force the set change to recycle if
// it's currently running. It will notice the processor has woken up
// and stop performing its work.
theSchedule().preempt();
}
break;
case SPM_SLEEPING:
if(changed_state)
{
// check for scheduled wakeup
uint64_t deadline = changer->getWakeTime ();
// enqueue scheduled wakeup request
changer->enqueue(RPM_ACTIVE_SET, deadline);
}
changed_state = FALSE;
if(ee_state->num_active_cores > 0)
{
SPM_CHANGE_STATE(SPM_WAKING_UP);
}
break;
case SPM_WAKING_UP:
if(changed_state)
{
// work our way back to the active set
if(RPM_SLEEP_SET == changer->currentSet() || changer->inTransition())
{
changer->enqueue(RPM_ACTIVE_SET, 0);
}
}
changed_state = FALSE;
// check for completion
if(RPM_ACTIVE_SET == changer->currentSet() && !changer->inTransition())
{
SPM_CHANGE_STATE(SPM_AWAKE);
}
break;
}
} while(changed_state);
INTFREE();
}
最终会跑到SetChanger::enqueue()里。
RPM与MPM的交互
RPM 状态读取
rpm的状态读取，在/d/rpm_stats里边可以读到AP这边设置的几个APSS,MPSS,PRONTO等几个对应的RPM状态。
读的内容当然也是从rpm_request这个shared memory里边读的。相应的设置在msm8916-pm.dts文件里边有。
qcom,rpm-stats@29dba0 {
compatible = "qcom,rpm-stats";
reg = <0x29dba0 0x1000>;
reg-names = "phys_addr_base";
qcom,sleep-stats-version = <2>;
};
qcom,rpm-master-stats@60150 {
compatible = "qcom,rpm-master-stats";
reg = <0x60150 0x2030>;
qcom,masters = "APSS", "MPSS", "PRONTO";
qcom,master-stats-version = <2>;
qcom,master-offset = <4096>;
};
qcom,rpm-rbcpr-stats@0x29daa0 {
compatible = "qcom,rpmrbcpr-stats";
reg = <0x29daa0 0x1a0000>;
qcom,start-offset = <0x190010>;
};
---------------------
作者：honghong96
来源：CSDN
原文：https://blog.csdn.net/hongzg1982/article/details/56516147
版权声明：本文为博主原创文章，转载请附上博文链接！
文章浏览阅读1k次。通过使用ajax方法跨域请求是浏览器所不允许的，浏览器出于安全考虑是禁止的。警告信息如下：不过jQuery对跨域问题也有解决方案，使用jsonp的方式解决，方法如下：$.ajax({ async:false, url: 'http://www.mysite.com/demo.do', // 跨域URL ty..._nginx不停的xhr
文章浏览阅读2k次。关于在 Oracle 中配置 extproc 以访问 ST_Geometry，也就是我们所说的 使用空间SQL 的方法，官方文档链接如下。http://desktop.arcgis.com/zh-cn/arcmap/latest/manage-data/gdbs-in-oracle/configure-oracle-extproc.htm其实简单总结一下，主要就分为以下几个步骤。..._extproc
文章浏览阅读1.5w次。linux下没有上面的两个函数，需要使用函数 mbstowcs和wcstombsmbstowcs将多字节编码转换为宽字节编码wcstombs将宽字节编码转换为多字节编码这两个函数，转换过程中受到系统编码类型的影响，需要通过设置来设定转换前和转换后的编码类型。通过函数setlocale进行系统编码的设置。linux下输入命名locale -a查看系统支持的编码_linux c++ gbk->utf8
文章浏览阅读750次。今天准备从生产库向测试库进行数据导入，结果在imp导入的时候遇到“ IMP-00009:导出文件异常结束” 错误，google一下，发现可能有如下原因导致imp的数据太大，没有写buffer和commit两个数据库字符集不同从低版本exp的dmp文件，向高版本imp导出的dmp文件出错传输dmp文件时，文件损坏解决办法：imp时指定..._imp-00009导出文件异常结束
文章浏览阅读143次。当下是一个大数据的时代，各个行业都离不开数据的支持。因此，网络爬虫就应运而生。网络爬虫当下最为火热的是Python，Python开发爬虫相对简单，而且功能库相当完善，力压众多开发语言。本次教程我们爬取前程无忧的招聘信息来分析Python程序员需要掌握那些编程技术。首先在谷歌浏览器打开前程无忧的首页，按F12打开浏览器的开发者工具。浏览器开发者工具是用于捕捉网站的请求信息，通过分析请求信息可以了解请..._初级python程序员能力要求
文章浏览阅读7.6k次，点赞2次，收藏6次。@Service标注的bean，类名：ABDemoService查看源码后发现，原来是经过一个特殊处理：当类的名字是以两个或以上的大写字母开头的话，bean的名字会与类名保持一致public class AnnotationBeanNameGenerator implements BeanNameGenerator { private static final String C..._@service beanname
文章浏览阅读6.9w次，点赞73次，收藏463次。1.前序创建#include<stdio.h>#include<string.h>#include<stdlib.h>#include<malloc.h>#include<iostream>#include<stack>#include<queue>using namespace std;typed_二叉树的建立
文章浏览阅读7.1k次。在Asp.net上使用Excel导出功能，如果文件名出现中文，便会以乱码视之。 解决方法： fileName = HttpUtility.UrlEncode(fileName, System.Text.Encoding.UTF8);_asp.net utf8 导出中文字符乱码
文章浏览阅读2.1k次，点赞4次，收藏23次。第一次实验 词法分析实验报告设计思想词法分析的主要任务是根据文法的词汇表以及对应约定的编码进行一定的识别，找出文件中所有的合法的单词，并给出一定的信息作为最后的结果，用于后续语法分析程序的使用；本实验针对 PL/0 语言 的文法、词汇表编写一个词法分析程序，对于每个单词根据词汇表输出： (单词种类, 单词的值) 二元对。词汇表：种别编码单词符号助记符0beginb..._对pl/0作以下修改扩充。增加单词
文章浏览阅读773次。我在使用adb.exe时遇到了麻烦.我想使用与bash相同的adb.exe shell提示符,所以我决定更改默认的bash二进制文件(当然二进制文件是交叉编译的,一切都很完美)更改bash二进制文件遵循以下顺序> adb remount> adb push bash / system / bin /> adb shell> cd / system / bin> chm..._adb shell mv 权限
文章浏览阅读6.8k次，点赞12次，收藏125次。1. 单目相机标定引言相机标定已经研究多年，标定的算法可以分为基于摄影测量的标定和自标定。其中，应用最为广泛的还是张正友标定法。这是一种简单灵活、高鲁棒性、低成本的相机标定算法。仅需要一台相机和一块平面标定板构建相机标定系统，在标定过程中，相机拍摄多个角度下（至少两个角度，推荐10~20个角度）的标定板图像（相机和标定板都可以移动），即可对相机的内外参数进行标定。下面介绍张氏标定法（以下也这么称呼）的原理。原理相机模型和单应矩阵相机标定，就是对相机的内外参数进行计算的过程，从而得到物体到图像的投影_相机-投影仪标定
文章浏览阅读2.2k次。文章目录Wayland 架构Wayland 渲染Wayland的 硬件支持简 述： 翻译一篇关于和 wayland 有关的技术文章, 其英文标题为Wayland Architecture .Wayland 架构若是想要更好的理解 Wayland 架构及其与 X (X11 or X Window System) 结构；一种很好的方法是将事件从输入设备就开始跟踪, 查看期间所有的屏幕上出现的变化。这就是我们现在对 X 的理解。 内核是从一个输入设备中获取一个事件，并通过 evdev 输入_wayland